General Info
ZIRCAR Alumina-Silica Insulating Blanket Type RS-B Moldable is composed of long, high strength ceramic fibers, with an inorganic alumina binder/rigidizing agent. It is a wet blanket that is shipped rolled up and sealed in a plastic bag to preserve its moldability.
Type RS-B Moldable forms a strong, rigid, low density insulation for applications to 900°C (1652°F). It is 100% inorganic, non-combustible and contains no toxic or hazardous materials. Type RS-B Moldable is ideal for insulation of complex shapes and exhibits excellent erosion resistance under conditions of high, hot gas velocity. It can be cut to any size with a knife, scissors, or steel rule die. It can be formed to virtually any shape desired. Type RS- B Moldable possesses excellent strength for ease of installation. An unique process of locking in the binder ensures that it will not migrate. The result is a uniform homogeneous structure throughout the entire material.
Type RS- B Moldable does not adhere to itself, yet it can be cemented using air-set mortar. Type RS- B Moldable will normally air dry in 24 to 48 hours, with all the properties of a pre-fired insulation. Curing can be accomplished with a hot air gun or torch, or by immediate temperature exposure in the application.
Type RS- B Moldable can be put directly into high temperature ovens or furnaces.
Properties
Typical Composition, % | |
Al2O3 |
33 |
SiO2 |
41 |
Other Metal Oxides |
26 |
Density, gm/cm3 (Ib/ft3) |
.30 (19) |
Maximum Use Temp.*, C(F) |
900(1600) |
Color, |
White |
Tensile Strength^, MPa(psi) |
1.2(175) |
Compressive Strength**, MPa(psi) | |
@10% Compression |
0.07(10) |
Shrinkage, % | |
Drying 75°C(167°F) |
0^, 3** |
Isothermal Soak,24 hrs.@ 800°C(1472°F) |
2^ |
Thermal Conductivity**,W/m °K(BTU/ft2 °F /in) | |
ASTM C177 | |
200°C (392°F) |
0.07(0.46) |
500°C (932°F) |
0.10(0.70) |
800°C (1472°F) |
0.16(1.08) |
* Maximum use temperature is dependent on variables such as stresses, both thermal and mechanical, and the chemical environment that the material experiences.
** Properties expressed parallel to thickness.
^Properties expressed perpendicular to thickness.
Composition
Silica Moldable Type RS-SI Moldable is a wet blanket that is a combination of high purity amorphous silica fibers and inorganic silica binder. Upon drying Type RS-SI Moldable becomes a rigid structure with useful properties to temperatures of 1200°C(2192°F). It dries to a low mass light weight insulation with low thermal conductivity and high structural strength.
Alumina-Silica Moldable Blankets comprise long, high strength ceramic fibers in an inorganic Alumina binder/rigidizer. They are 100% inorganic and noncombustible. Alumina-Silica Blanket Type B is for applications to 900°C (1600°F) and Type C is for applications to 1260°C (2300°F). These materials harden to be a self supporting, extremely insulating ceramic fiber body.
- Immune to Thermal Shock
- Highly Insulating, Low Mass
- Strong Self Supporting When Dry
- Non RCF
Instructions
SUGGESTED APPLICATIONS
-
Type RS- B Moldable is used as hot gas duct, stack and flue liners.
-
Type RS- B Moldable is used as custom molded valve enclosures.
-
Type RS- B Moldable is used as small appliance insulation.
-
Type RS- B Moldable is used as hot-face insulation where gas velocity is of concern.
-
Type RS- B Moldable is used for custom fabricated insulation parts.
-
Type RS- B Moldable is used as exhaust manifold insulation.
-
Type RS- B Moldable is used as back-up insulation.
Download the RS-B Moldable PDF File
SDS (in PDF format)
Other Information
AVAILABILITY
Please call, fax or e-mail for pricing and availability.
Item # | Description |
KS20 | RS-B MOLDABLE, 24″ X 60″ X 1/4″ |
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION AND ARE SUBJECT TO ZIRCAR REFRACTORY COMPOSITES, INC. TERMS AND CONDITIONS. ALL PRICES ARE F.O.B. FLORIDA, NY AND ARE IN U.S. DOLLARS